|
| 貨號 | d |
| EINECS編號 | FlexRez 155 |
| 品牌 | ALSEAL |
| 是否危險化學品 | 否 |
| 顏色 | 鋁色 |
| CAS編號 | |
| 別名 | FlexRez 155 |
| 保質期 | 12個月 |
| 耐水性 | 1 |
| 耐洗擦性 | 1 |
| 英文名稱 | FlexRez 155 |
| 分子式 | FlexRez 155 |
| 是否進口 | 否 |
Flexrez 150 is intended for use as a binder for clear or pigmented coatings that require extremely high flexibility and excellent adhesion. Clean Up As soon as possible after processing and before coating has dried on equipment, clean up with warm water. If coating has been allowed to dry, it may be necessary to clean with a solvent such as lacquer thinner. Precautions Although water base material, spray droplets should not be inhaled. Use adequate ventilation. In confined areas, use adequate forced ventilation during application and drying. When spraying, a suitable protective vapor/particulate respirator such as #8709 manufactured by 3M Co., should be worn. In areas of minimum air movement, a fresh air mask such as #W-292 manufactured by #M Co. should also be used. Also refer to the FlexRez 150 Material Safety Data Sheet.
AC020是Alseal 519的水白色添加劑，可將固化溫度降至*300°F（149°C）。
被感動最多的地區應使用脫脂溶劑，如酒精或甲基乙基徹底脫脂 酮。它是使用脫脂溶劑不留下殘留物是很重要的。
Alseal 189P is a high temperature water-based two component phenolic / epoxy coating composition containing
laminar orienting pigments. This coating provides a very hard, abrasion resistant, corrosion resistant, and
chemical resistant barrier film at constant temperatures up to 400°F with intermittent peak temperatures of
600°F complemented by a near-zero VOC.
Color
Yellow or Light Gray
Packaging
One gallon containers are standard.
Surface Preparation
New metal surfaces should be cleaned of oil, grease and dirt. The surface should then be prepared by
blasting, chemical treatment, or both depending on specific specifications and a proper Alseal basecoat
applied
